Concare’s ShineRight™ Systems
Usually when people imagine a “polished floor,” they envision terrazzo. Terrazzo is a ¼” to 2” agglomeration of an epoxy resin or cement binder that is blended with marble, glass, granite or plastic aggregate. This mixture is then placed on a concrete floor, ground with diamonds to a glossy finish and sealed.
The concrete polishing technique used in Concare’s ShineRight™ systems creates a similar appearance. Since concrete itself is a combination of cement, limestone, sand and other aggregates, it can also be ground with diamonds and then sealed for a sleek, shiny look.
Concare uses a patented dry polishing process with our ShineRight™ system to speed up installation and minimize the mess typically associated with wet polishing. Thanks to extensive floor preparation expertise, Concare crews make quick work of removing old tile, carpet and other floor coverings so your ShineRight™ system can be quickly and easily installed.
Is a ShineRight™ System right for your facility? Consider the following:
Advantages:
- Contributes to LEED® (Leadership in Energy and Environmental Design) Green Building Rating
- Minor scratches and surface damage removed
- Increases concrete’s surface hardness
- Eliminates concrete dust
- Increases light reflectivity
- Delays concrete staining
- Makes cleaning easier
- Rejuvenates old terrazzo floors
- Polishing and dyeing vertical surfaces also available
Considerations:
- May not provide adequate slip resistance in wet environments
- Cannot prevent damage to concrete itself, especially with exposure to harsh chemicals
- Re-polishing every few years needed to restore shine if not well-maintained
- Repair work (cracks, joints) will be visible
- New concrete must be sufficiently cured before application
- Soft or dusting concrete may require a pretreatment before system application
- Concrete's condition will determine the finished product; aggregates, type and age of the cement, and other characteristics are factors. A test area is recommended to determine finished appearance.
ShineRight™ System Choices
Concare’s ShineRight™ line is available in three different systems. Choose the system that’s right for your facility’s immediate and long-term needs. Consider system additions that will improve the appearance of your floor.
ShineRight™ 800 System
For a basic concrete polishing application, ShineRight™ 800 is a solid choice. The ShineRight™800 system includes the application of a densifier/hardener/sealer. Gloss may be enhanced with your own floor polish, or with Concare’s recommended Concare Solutions™ Shine Solution.
ShineRight™ 1500 System
Want to create an even higher luster? ShineRight™ 1500 adds a diamond polishing step to improve initial gloss by 50%, and then finishes with the application of a densifier/hardener/sealer.
ShineRight™ 3000 System
Get out your sunglasses! The mirror finish of the ShineRight™ 3000 system is ideal for main walkways and customer contact areas. This system provides the highest gloss level Concare offers.
ShineRight™ Systems Overview |
Description |
Cost |
Initial cost = Medium |
Lifespan |
Gloss: Will last years, depending on maintenance routine. Keeping the surface free of dirt, grit and abrasives will prevent prematurely diminishing the shiny finish. Dustproofing: 10 years |
Materials |
All products and processes are -0- VOC. Effluent from the final densifier/sealer application is disposable in sanitary sewers. |
Maintenance |
Procedures: Sweep and wet mop daily. To preserve the floor’s original gloss, purchase the appropriate equipment and establish a proper maintenance routine. Download Concare’s ShineRight™ recommended maintenance instructions. |
| Recommended Maintenance Products: |
|
Recommended Industries |
Food: Distribution centers, utility areas Healthcare: Distribution facilities, support areas, pedestrian walkways Industrial & Manufacturing: Assembly areas, pedestrian walkways Transportation & Distribution: Warehouses, repair centers Retail: Customer contact areas, stockrooms Professional Services: Endless design possibilities |
Installation Time |
1-2 days for 2500-5000 sf |
Impact Resistance |
Better |
Scratch Resistance |
Better |
Wear Resistance |
Better |
Damageability |
Low |
Hides Imperfections |
No |
Forklift Traffic |
Best |
Foot Traffic |
Best |
High Temperature Service (above 140° F) |
Yes |
Extreme Cold Applications (below 35° F) |
Yes |
Color Options |
Available in clear or color (pigmented) applications; solvent or water-based dyes mimic the appearance of a coated floor. A test application is recommended to ensure color satisfaction. Download the ShineRight™ Systems Color Chart. |
System Options |
System options include:
|
ShineRight™ System Additions
Color
Concare uses specially formulated concrete dyes in the ShineRight™ system, applied before our densifier/sealer. This makes the color a more permanent part of the concrete. Acid-based stains are not used in ShineRight™ floors so the polished finish isn’t affected.
Floor Markings
Prevent slip-and-fall accidents caused by water, oil and dust while saving on Work Comp claims by adding one of Concare’s specialty floor markings. Iridescent products can also light the way when the power goes out for safe building evacuation. Whether you require striping for safety, product locators for inventory, location marks for your 5S program or even your company logo, Concare can provide it.
See what Concare’s ShineRight™ floors look like in our Photo Gallery.
Learn about Concare’s other flooring systems:
LevelRight™ Systems GuardRight™ Systems CoatRight™ Systems
"Often there are obstacles that get in the way...
of a quality installation. Working through these obstacles is what makes Concare special, and the quality of your finished product is evidence of this."
--Mike S., Service Manager,
Palatine, IL
